1
/
of
2
GS2 Awards
LaserBond 100
LaserBond 100
Regular price
$79.95 USD
Regular price
Sale price
$79.95 USD
Unit price
/
per
Couldn't load pickup availability
LaserBond 100 12oz
LaserBond 100 Aerosol Spray is an All Purpose laser bonding material for producing permanent black marks on most surfaces and materials and is ready to use. It is ethanol based which allows for a faster drying time. It can be used on a variety of substrates including glass, ceramic, stone and metals such as stainless steel, brass, aluminum, copper, titanium, tin, nickel and many others. Shake the can well for about one minute before using. For best results, use between 50º and 90º F.
How to Apply:
It is recommended that the aerosol spray be applied by holding the spray can approximately 6” – 8” from the surface and spraying directly onto it using a side-to-side motion. Always be careful to ensure a thin, even and smooth coat is applied. Any variation in the coating thickness such as drips, runs or brush marks will translate into variations in the final appearance of the resulting mark. Spraying usually provides the best results when properly applied.
What is the best coating thickness?
A thin, even and smooth coating thickness of 0.001” – 0.002” (0.05mm) is best. A thicker coating will only require more laser power or slower speed and will also decrease the resolution of the resulting mark.
All cans are only able to be shipped by ground due to the alcohol based materials.
Share
